WiFi Digital Temperature Controller Heating ITC-306A 110V Thermostat Heat Relay

Description

WiFi 306A Aquarium Version
Dual Heating WIFI Aquarium Thermostat
Temperature Control Range: 20.0℃~35.0℃/68.0℉~95.0℉
Temperature Measurement Range: -40℃~100℃/-40℉~212℉
Temperature Display Accuracy:0.1℃/℉(<100℃/℉), 1℃/℉(>=100℃/℉)
Uses: This aquarium thermostat is for fish tank, water terrarium,
freshwater faltwater tank,tropical Fish Shrimp Coral Tortoise
Related Parameters
Voltage: 100~240Vac 50/60Hz
Current: 10A Max
Wattage: 1100W(110V)
Wireless Connection: 2.4GHz Wi-Fi
Size: 170*68*32mm
Screen Type: LCD
Dual Protection
The aquarium temperature controller is equipped with 2 relays to ensure that the power can be turned off under any circumstances,
this will protect your fish from being hurt by overheated water.
Two Probes
The aquarium heater controller will alarm if the temperature difference between 2 probes is bigger than 3℃/5℉
(so it is suggested to place the 2 probes in same place). Please note the both probes should be placed in the same aquarium
not for 2 aquariums, the 2 probes are designed for dual protection to identify a probe fault, your fish might be in danger
as it is hard to know the probe is broken immediately if the temperature controller has only 1 probe.
APP Notification
Pair the aquarium controller with your phone via 2.4GHz Wi-Fi, the device will alarm if there are exceptions.
And all exceptions will be updated to the APP, the app will push notifications to remind you. An app can control multiple thermostats
to work at the same time. Also, the aquarium temperature controller can be turned off at a touch of a button in the app.
Chitinous Heating Alarm
You can set 1-72 hours to heat the water.It is used to remind you whether the water temperature has reached the desired
range or exceeded the desired range during the set heating time, then you can check the power of the heater is not large enough or the heater is broken.
High Power
The 1100W high-power aquarium thermostat is compatible with most kinds of aquarium heaters,
you don’t need to assemble the product yourself, just plug and play. The temperature setting range is 20.0℃~35.0℃/68.0℉~95.0℉
and the detectable temperature range is -40℃~100℃/-40℉~212℉.
Package Contents
--ITC-306A-WIFI*1
--
Aquarium Probe*2
--User Manual*1
--Warranty Card*1
Note:
The device only supports 2.4GHz Wi-Fi router.
If the connection is failed, please feel free to download the user manual to see the AP mode connection and follow the steps.
On Jun-03-21 at 02:29:35 PDT, seller added the following information: