SCITOO 26550 Power Steering Rack & Pinion Assembly For 2005-07 Nissan Murano Awd

Description

Product Description:
Part: Steering Rack and Pinion
Rack Type:Hydraulic
Compatible : Nissan Murano 2005-2007
Part Number: 80-00985AN, 49001CB800, 49001-CB800, 49001CC20B, 49001-CC20B
SCITOO 26550 Power Steering Rack & Pinion Assembly For 2005-07 Nissan Murano Awd
Product Description:
Part: Steering Rack and Pinion
Rack Type:Hydraulic
Compatible : Nissan Murano 2005-2007
Part Number
:
80-00985AN, 49001CB800, 49001-CB800, 49001CC20B, 49001-CC20B
Casting Material : Aluminum
Package Contents Rack and Pinion, Kit, Tag, Instruction Sheet
Product Condition : New
Number of Mounting Holes : 2
Hose Port Type : O-Ring/O-Ring
Tie Rod Ends Included : Inner
Total Turns Lock To Lock : 3.3
Pressure Port Thread Size : M14 x 1.5
Return Port Thread Size : M16 x 1.5
Rack Length (mm) : 1148.00
Thread Length (In) : 2.08
Thread Length (mm) : 52.83
Distance Between Mounting Holes (in) : 10.79
Distance Between Mounting Holes (mm) : 273.99
Steering Rack Color : Black
Input Shaft Diameter (in) : 0.69
Input Shaft Diameter (mm) : 17.40
Input Shaft Length (in) : 1.04
Input Shaft Length (mm) : 26.42
Rack Length (in) : 45.20
Product Description:
Steering gear
,also called steering gear, is the most important part of automobile steering system.
Power steering (PAS)
or steering assist system helps drivers steer by augmenting steering effort of the steering wheel.
Power steering rack and pinion
is the most important part for vehicle swerving and security assurance.
It converts the rotational motion of the steering wheel into the linear motion needed to turn the wheels and provides a gear reduction,
thus making it easier to turn the wheels.
Compatible with the following vehicles:
MAKE
MODEL
YEAR RANGE
SPECIFIC DETAILS
NISSAN
MURANO
2005-2007
4WD/4x4 Models Only
Note:
In order to ensure the normal operation of the steering gear, relevant parts shall be cleaned as much as possible before installation.
note:
1.In order to avoid the fault caused by the dirt entering the steering oil circuit, the plug on each oil port of steering pump of steering gear shall be opened before connecting the oil pipe, and the oil pipe and plug shall be carefully cleaned and deburred.
2. Turn the steering wheel to the straight ahead position.
3. Clean the mounting bracket of the steering gear and relevant mating surfaces of the steering gear.
4. For the adjustable steering column, use a suitable rope to pass through the space of the cross fork of the steering shaft, hang the steering shaft, and connect the steering shaft and the input shaft of the steering gear.
5. Turn the steering gear to the middle position to align the relevant marks at the input end and output end of the steering gear.
6. Install the steering gear on the mounting base and tighten the fixing bolts.
7. Universal joint or coupling between mounting column and steering gear.
8. For the adjustable steering column, the upper end seal of the steering gear shall not be damaged when the universal joint is installed.
9. Keep the steering wheel in straight ahead position.
10. Put the pitman arm on the steering gear to align the two marks. 10. Tighten the locknut according to the specified torque and rivet (anti loose pit)
SCITOO 26550 Power Steering Rack & Pinion Assembly For 2005-07 Nissan Murano Awd
Product Description:
Part: Steering Rack and Pinion
Rack Type:Hydraulic
Compatible : Nissan Murano 2005-2007
Part Number
:
80-00985AN, 49001CB800, 49001-CB800, 49001CC20B, 49001-CC20B
Casting Material : Aluminum
Package Contents Rack and Pinion, Kit, Tag, Instruction Sheet
Product Condition : New
Number of Mounting Holes : 2
Hose Port Type : O-Ring/O-Ring
Tie Rod Ends Included : Inner
Total Turns Lock To Lock : 3.3
Pressure Port Thread Size : M14 x 1.5
Return Port Thread Size : M16 x 1.5
Rack Length (mm) : 1148.00
Thread Length (In) : 2.08
Thread Length (mm) : 52.83
Distance Between Mounting Holes (in) : 10.79
Distance Between Mounting Holes (mm) : 273.99
Steering Rack Color : Black
Input Shaft Diameter (in) : 0.69
Input Shaft Diameter (mm) : 17.40
Input Shaft Length (in) : 1.04
Input Shaft Length (mm) : 26.42
Rack Length (in) : 45.20
Product Description:
Steering gear
,also called steering gear, is the most important part of automobile steering system.
Power steering (PAS)
or steering assist system helps drivers steer by augmenting steering effort of the steering wheel.
Power steering rack and pinion
is the most important part for vehicle swerving and security assurance.
It converts the rotational motion of the steering wheel into the linear motion needed to turn the wheels and provides a gear reduction,
thus making it easier to turn the wheels.
Compatible with the following vehicles:
MAKE
MODEL
YEAR RANGE
SPECIFIC DETAILS
NISSAN
MURANO
2005-2007
4WD/4x4 Models Only
Note:
In order to ensure the normal operation of the steering gear, relevant parts shall be cleaned as much as possible before installation.
note:
1.In order to avoid the fault caused by the dirt entering the steering oil circuit, the plug on each oil port of steering pump of steering gear shall be opened before connecting the oil pipe, and the oil pipe and plug shall be carefully cleaned and deburred.
2. Turn the steering wheel to the straight ahead position.
3. Clean the mounting bracket of the steering gear and relevant mating surfaces of the steering gear.
4. For the adjustable steering column, use a suitable rope to pass through the space of the cross fork of the steering shaft, hang the steering shaft, and connect the steering shaft and the input shaft of the steering gear.
5. Turn the steering gear to the middle position to align the relevant marks at the input end and output end of the steering gear.
6. Install the steering gear on the mounting base and tighten the fixing bolts.
7. Universal joint or coupling between mounting column and steering gear.
8. For the adjustable steering column, the upper end seal of the steering gear shall not be damaged when the universal joint is installed.
9. Keep the steering wheel in straight ahead position.
10. Put the pitman arm on the steering gear to align the two marks. 10. Tighten the locknut according to the specified torque and rivet (anti loose pit)
Item Specifics
Brand :
SCITOO
Manufacturer Part Number :
CB102610S01
Type :
Steering Gear,Steering Gear Body,Steering Rack,Rack & Pinion
Performance Part :
Yes
Installation method :
Performance/Custom
Transmission Type :
Automatic
Material :
High Quality Steel
Surface Finish :
Polished, Rust Protected
Manufacturer Warranty :
3 Years
Vintage Car Part :
Yes
Fitment Type :
Direct Replacement
Rack Type :
Hydraulic
Greasable or Sealed :
YES
Other Part Number :
Steering gear
Rack Material :
corrosion and rust prevention
Note :
Backed by satisfying after-sales service
Advantage :
Rotate quickly and normal position
Interchange Part Number :
263040,Rack 26550,26-3028,25936,80-00985AN
Superseded Part Number :
49001-CA000,49001CC20B,48521CB025
OE/OEM Part Number :
rack replacement kit,rack and pinion,power rack parts
OE Number :
Power Steering Rack,Steering Rack and Pinion
Sub Type :
Rack and Pinion Assembly, Rack and Pinion Rack Gear
Package :
Dust plug
Universal Fitment :
No
Itment Note :
Top performance For long service life
Mounting Hardware Included :
As the picture
Fits :
2005-2007 Nissan Murano 4WD/4x4 Models 3.5L V6
For :
2005-2007 Nissan Murano SL Sport Utility 4-Door 3.5L
Shipping
WARNING:
Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
1. Package handling takes about 2 business days at our warehouse, so please make sure entering correct payment and shipping information before checking out. Once your payment is completed, we are not going to accept any more changes to your order.
2.All domestic orders will be shipped via USPS, UPS or Fedex from our US warehouse and usually arrives to your door in about 2-7 business days.
3.Local pick up is not available.
4.Orders to the rest of world may be shipped out from our warehouse in HongKong.
5.International Buyers C Please Note:
a. Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility.
b. Please check with your country customs office to determine what these additional costs will be prior to bidding/buying.
]
Payment
[
We only accept payment through PayPal. You can open a Paypal account at www.paypal.com.
]
Returns
1.All of our brand new items come with a 60-Days money-back guarantee.
2.We define the item as defective only if it doesn't function as described, It is the buyer's responsibility to understand the item description before bidding.
3.We will replace the defective items, provided that they are in stock within the warranty period posted with the listing and the buyer return the original item and pay for the S&H cost for the replacement.
4.We will refund the purchase price if the replacement is not available or buyer prefers a refund and send the original item back at his/her own cost.
5.Shipping& handling cost are not refundable.
6.Man-made damage by abuse or wrong operation is not covered by this warranty.
7.No product liability insurance is assumed.
8.Refunds will be credited within 5 to 7 business days of receiving the return. When we've received and processed the return, we will refund the applicable amount minus any Recovery Fees (See Details Below) for the amount you paid for the item(s), plus any applicable sales tax.
]
Customer Services
Q: How do I pay for my purchase?
A: MY store accepts PayPal.
Q: When will the item be shipped out?
A: This item will be shipped with 2 business day once payment completed.
Q: Where is my tracking number?
A: Please log on your account, click "my eBay"-->"my summary", or open your email box and find the shipping notification email.
Q: How do I return an item?
A: My tore accepts returns. Items must be returned within 60 days. Refunds will be given as money back. Please contact our customer service before you return an item.
]
Feedback
1. We will leave positive feedback once we get your payment.
2. If you are dissatisfied for any reason, please do contact us before you leaving a feedback. We will work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave a feedback to all our customers.
3. If you are satisfied with the product you received, wish you can leave us a feedback.
New List Item
2pcs Oxygen Sensor O2 02 Fits 2008 Pontiac Grand Prix 3.8L Upstream & Downstream
USD 27.93
For 2004-2010 Toyota Sienna Front Tie Rod End EV80893 ES80626 ES80627 Suspension
USD 61.27
Top Roof Rack Cross Baggage Luggage Rail Cross Bar For KIA Sorento 2015-2022 USA
USD 73.68
Suspension 2pc Front Stabilizer Sway Bar Links Kit For Chevy & GMC 1500 Trucks
USD 26.17
Power Heated Mirrors For Freightliner Cascadia 08-16 LH+RH Side Hood Black Pair
USD 380.49
Shop Category
Store Home
UTV & ATV Brake System Parts
▷  Brake pads
♢  Sintered Brake Pads
♢  Kevlar Carbon Brake Pads
◈  Brake shoes
Auto parts
◈  Towing Mirrors
◈  Ignition Coil
◈  Coilover
◈  Lift Support
◈  Wheel Spacers
◈  Key Case
◈  Struts/Absorbers Shocks
◈  Fuel Pump Assembly
◈  Starter
◈  CV Axle
◈  Trunk Floor Mats
◈  Exterior Light
◈  Blower Motor
◈  complete struts
◈  Fastener
◈  Window Switch
wheel hub bearing
Door handle
Cylinder Head Gasket Sets
suspension kit
◈  Suspension Kits
◈  suspension cj
◈  suspension gxy
◈  suspension fu
AC Compressor
Brake Pads & Rotors
◈  Brake Rotors
◈  Brake Pads
◈  Brake Rotors and Pads
◈  Brake Pad Sensor
◈  Brake Drum
◈  Brake Shoe
Air suspensions
Car Seat Cover
leveling lift kit
Nerf Bars & Running Boards
Alternators
Cylinder Piston Gasket Kit
Wheel lug nut
Window Regulator
ball joint
Fuel Injectors
Car Cover
Car Tools
Thermostat Housing
Radiator Coolant Tank
Windshield Wiper Motor
Door Lock Actuator
Power Steering Pump
Variable Timing Solenoid (VVT)
Electric Water Pump
Valve Cover
Fuel Tank Pipe
Oil Pump
Timing Chain Kits
Timing Belt Kits
Water Pumps
Strut Tie Bar
Throttle Body
Harmonic Balancer
Oil Pan
Oxygen Sensors
AC Condenser & Radiator
◈  AC Condenser
◈  Radiator
◈  AC Condenser & Radiator
Mass Air Flow Sensor
Motorcycle Carburetor & Parts
Urea Pump
Cooling Fan Clutch
Cooling Fan
Hydraulic Lifter&Roller Lifter
Suspension+Strut+Bearing
Starter Relay Solenoid
Regulator Rectifier
HVAC
Towing&Hauling
ATV Rear Wheel Axle
Parking sensor
Car Antenna
ABS Wheel Speed Sensor
PTO Clutch
Vacuum Pump
Tensioners
Spoilers & Wings
Oil Cooler
Purge Valve
Knock Sensor
Turbocharger
Crankshaft Position Sensor
Camshaft Position Sensor
MAP Sensor
Oil Pressure Sensor
Throttle Position Sensor
Stator
Catalytic Converter
idle air control valve
Transfer Case Shift Motor
Secondary Air Injection Pump
Running Board Motor
Clutch Slave Cylinder
Wheel Spacers
Consoles & Parts
Roof rack
Bumper
Tire Pressure Gauge
Steering Rack
Wiring Harness
Air Diesel Heater
Spark Plug Ignition Wire
Engine Mount
Glow Plug
Air Cleaner Filter Box
Ignition Distributor
Cylinder Piston Kit
Pressure Tester Gauge
Jack Stands
C Notch & Flip Kit
Wheel Lug
Sun Visor
window visor
trim tilt motor
ATV Brake Caliper
Car Carburetor
Horns & Sirens
Air suspension valves solenoid
Heater Control Valve
Steering U-Joint
Fuel Shut Off Solenoid
Fuel Cell Tank
Driveshaft
Height Level Sensor
Temperature Sensor
Radiator Hose
Release Cable
Ballast module
Rubber Seal Strip
Dipstick
Removal Open Tools
Camshaft & Crankshaft
ATV Brake Master Cylinder
4WD Actuator
Trailer Adapter
Battery Switch
Wheel Hub Bearing Knuckle
Throttle Cable Carb Bracket
Oil Fuel Hose Line
Oil Filter Wrench
suspension 5 BIN
◈  chenjiao
LED headlight Assembly
headlight motorcycle
Foot Rest Pedal
O Ring
water Pump Impeller
Tire Pressure Sensor
License Plate Frame
Fastener
Strut Mount
A/C Expansion Valve
Wheel Stem Air Valve Cap
Splash Guards & Mud Flaps
Rocker Arm
Evaporators
Heater Cores
vehicle speed sensor
RV Water Pump
Fuel Pressure Regulator
Light Bar Mount Bracket
Sensor-8
CV axle+Brake Pads/Rotors
Steering Shaft
transmission filter
transmission kit
Steering Wheel
Steering Wheel Hub
Steering Gear Box
Alternator Bracket Kit
snorkel air intake
CDI BOX
Spindle
Proportioning Valve
Hydraulic Hand Brake
Other Golf Cart Parts
Window Glass Hinge
4 pcs wheel hub bearing
ATV Tires
jumper cable
Brake Line Lock Kit
Fender Flares
Brake Oil Hose
Wheel Hub Centric Rings
dash cover
Front Bumper Lip
primary drive clutch
golf
Boat Jack Plate
AC Compressor Control Valve+A
carburetor intake mainfold
Fuel Valve& Petcocks
Motorcycle Brake Clutch Lever
Car Window Film Tint Tools
Cargo Cover
Lower Kits & Parts
Other Motorcycle Parts
Steering Knuckle
Hub Caps
ATV Ignition Switch
fog lights
winch
Windshields
Jeep Wrangler Headlights
Door Hinge Conversion Kits
Door check stop
Pillar Posts
Windshield Outer Trim
Tonneau Cover
Fuse Holder Box
Power Brake Booster
Radiator Support
Blower Motor & Resistor
Hot Stapler
Wheel Rim
Parking Brake Actuator
Lights
◈  Side/Cab Marker Lights
◈  Third Brake Lights
◈  Instrument Panel Lights
◈  Interior Lights
◈  Exterior Lights
◈  Led Headlights
◈  Special Model Lights
Handlebar Riser
lift support
Other
Hot Item
2pc 3157 4114 4157 LED DRL Driving Daytime Running Light Bulbs 12SMD 6000K White
USD 8.95
Inline Universal High Pressure Fuel Pump With Installation Kit 0580464070
USD 24.99
For Chevrolet Silverado GMC Sierra 1500 4.8L 5.3L 1999-2003 Fuel Pump Module
USD 32.69
Turbo Turbocharger For Chevy Cruze Sonic Trax & Buick Encore 1.4T 55565353 140HP
USD 223.99
12V Universal Fuel Pump Gas Diesel Inline Low Pressure HEP-02A BHEP-02A
USD 10.60
Picture
SCITOO 26550 Power Steering Rack & Pinion Assembly For 2005-07 Nissan Murano Awd
Product Description:
Part: Steering Rack and Pinion
Rack Type:Hydraulic
Compatible : Nissan Murano 2005-2007
Part Number
:
80-00985AN, 49001CB800, 49001-CB800, 49001CC20B, 49001-CC20B
Casting Material : Aluminum
Package Contents Rack and Pinion, Kit, Tag, Instruction Sheet
Product Condition : New
Number of Mounting Holes : 2
Hose Port Type : O-Ring/O-Ring
Tie Rod Ends Included : Inner
Total Turns Lock To Lock : 3.3
Pressure Port Thread Size : M14 x 1.5
Return Port Thread Size : M16 x 1.5
Rack Length (mm) : 1148.00
Thread Length (In) : 2.08
Thread Length (mm) : 52.83
Distance Between Mounting Holes (in) : 10.79
Distance Between Mounting Holes (mm) : 273.99
Steering Rack Color : Black
Input Shaft Diameter (in) : 0.69
Input Shaft Diameter (mm) : 17.40
Input Shaft Length (in) : 1.04
Input Shaft Length (mm) : 26.42
Rack Length (in) : 45.20
Product Description:
Steering gear
,also called steering gear, is the most important part of automobile steering system.
Power steering (PAS)
or steering assist system helps drivers steer by augmenting steering effort of the steering wheel.
Power steering rack and pinion
is the most important part for vehicle swerving and security assurance.
It converts the rotational motion of the steering wheel into the linear motion needed to turn the wheels and provides a gear reduction,
thus making it easier to turn the wheels.
Compatible with the following vehicles:
MAKE
MODEL
YEAR RANGE
SPECIFIC DETAILS
NISSAN
MURANO
2005-2007
4WD/4x4 Models Only
Note:
In order to ensure the normal operation of the steering gear, relevant parts shall be cleaned as much as possible before installation.
note:
1.In order to avoid the fault caused by the dirt entering the steering oil circuit, the plug on each oil port of steering pump of steering gear shall be opened before connecting the oil pipe, and the oil pipe and plug shall be carefully cleaned and deburred.
2. Turn the steering wheel to the straight ahead position.
3. Clean the mounting bracket of the steering gear and relevant mating surfaces of the steering gear.
4. For the adjustable steering column, use a suitable rope to pass through the space of the cross fork of the steering shaft, hang the steering shaft, and connect the steering shaft and the input shaft of the steering gear.
5. Turn the steering gear to the middle position to align the relevant marks at the input end and output end of the steering gear.
6. Install the steering gear on the mounting base and tighten the fixing bolts.
7. Universal joint or coupling between mounting column and steering gear.
8. For the adjustable steering column, the upper end seal of the steering gear shall not be damaged when the universal joint is installed.
9. Keep the steering wheel in straight ahead position.
10. Put the pitman arm on the steering gear to align the two marks. 10. Tighten the locknut according to the specified torque and rivet (anti loose pit)
Item Specifics
Brand :
SCITOO
Manufacturer Part Number :
CB102610S01
Type :
Steering Gear,Steering Gear Body,Steering Rack,Rack & Pinion
Performance Part :
Yes
Installation method :
Performance/Custom
Transmission Type :
Automatic
Material :
High Quality Steel
Surface Finish :
Polished, Rust Protected
Manufacturer Warranty :
3 Years
Vintage Car Part :
Yes
Fitment Type :
Direct Replacement
Rack Type :
Hydraulic
Greasable or Sealed :
YES
Other Part Number :
Steering gear
Rack Material :
corrosion and rust prevention
Note :
Backed by satisfying after-sales service
Advantage :
Rotate quickly and normal position
Interchange Part Number :
263040,Rack 26550,26-3028,25936,80-00985AN
Superseded Part Number :
49001-CA000,49001CC20B,48521CB025
OE/OEM Part Number :
rack replacement kit,rack and pinion,power rack parts
OE Number :
Power Steering Rack,Steering Rack and Pinion
Sub Type :
Rack and Pinion Assembly, Rack and Pinion Rack Gear
Package :
Dust plug
Universal Fitment :
No
Itment Note :
Top performance For long service life
Mounting Hardware Included :
As the picture
Fits :
2005-2007 Nissan Murano 4WD/4x4 Models 3.5L V6
For :
2005-2007 Nissan Murano SL Sport Utility 4-Door 3.5L
Shipping
Payment
Returns
Customer Services
Feedback
WARNING:
Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
1. Package handling takes about 2 business days at our warehouse, so please make sure entering correct payment and shipping information before checking out. Once your payment is completed, we are not going to accept any more changes to your order.
2.All domestic orders will be shipped via USPS, UPS or Fedex from our US warehouse and usually arrives to your door in about 2-7 business days.
3.Local pick up is not available.
4.Orders to the rest of world may be shipped out from our warehouse in HongKong.
5.International Buyers C Please Note:
a. Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility.
b. Please check with your country customs office to determine what these additional costs will be prior to bidding/buying.
]
[
We only accept payment through PayPal. You can open a Paypal account at www.paypal.com.
]
1.All of our brand new items come with a 60-Days money-back guarantee.
2.We define the item as defective only if it doesn't function as described, It is the buyer's responsibility to understand the item description before bidding.
3.We will replace the defective items, provided that they are in stock within the warranty period posted with the listing and the buyer return the original item and pay for the S&H cost for the replacement.
4.We will refund the purchase price if the replacement is not available or buyer prefers a refund and send the original item back at his/her own cost.
5.Shipping& handling cost are not refundable.
6.Man-made damage by abuse or wrong operation is not covered by this warranty.
7.No product liability insurance is assumed.
8.Refunds will be credited within 5 to 7 business days of receiving the return. When we've received and processed the return, we will refund the applicable amount minus any Recovery Fees (See Details Below) for the amount you paid for the item(s), plus any applicable sales tax.
]
Q: How do I pay for my purchase?
A: MY store accepts PayPal.
Q: When will the item be shipped out?
A: This item will be shipped with 2 business day once payment completed.
Q: Where is my tracking number?
A: Please log on your account, click "my eBay"-->"my summary", or open your email box and find the shipping notification email.
Q: How do I return an item?
A: My tore accepts returns. Items must be returned within 60 days. Refunds will be given as money back. Please contact our customer service before you return an item.
]
1. We will leave positive feedback once we get your payment.
2. If you are dissatisfied for any reason, please do contact us before you leaving a feedback. We will work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave a feedback to all our customers.
3. If you are satisfied with the product you received, wish you can leave us a feedback.
Copyright of CN-Batteries . All rights reserved.