R-Hopped ZCI 6.02mm Steel Tightbore barrel Flat-Hop Bucking S-Nub AEG R-Hop RHOP

Description

This is a
COMBO
package, including:
1, R-Hopped
ZCI 6.02mm Stainless Steel Tightbore Barrel
2,
Flat-Hop Bucking
3, S-Nub of your choice.
Please choose the length of the R-Hopped ZCI TBB according to your gear, and the S-Nub according to your hopup.
Features:
R-Hopped
ZCI 6.02mm Stainless Steel Tightbore Barrel
·
R-Hop is the single most important part in airsoft that extends your effective range to over
60m/200ft
. Max range of
90m/300ft
can be achieved
(with M130 spring, 1.7J).
·
This
ZCI
®
6.02
TBB is already professionally R-Hopped.
R-Hopping Steps: 1 Thoroughly clean the TBB using ethanol alcohol. 2 Professional gluing. 3 Visual and “push from inside” inspection of the R-Hop.
·
An
EXTRA R-Hop
is also included, in case the first one is damaged in game.
·
12
Lengths to choose from:
300mm,
340mm,
363mm,
380mm,
407mm,
430mm,
455mm & 509mm.
Newly added: 229, 247, 275, and 550mm. These shorter than 300mm cannot fully take the advantage of R-Hopping. 550mm requires enough air to push the BB, therefore is recommended with a HPA build.
·
This R-Hop is Extremely hard to fabricate due to the
2X
95 degree cuttings
.
·
Please make sure of the right length for your airsoft replica. We do not accept returns if wrong lengths were selected.
·
Traditional R-
Hops are 1.5mm thick and airsoft barrels are 1.25mm thick. Thus, sanding is required. Our R-Hops are
Exactly 1.25mm thick
. Therefore,
NO SANDING is required
.
·
Cold weather resistant
.
Flat-Hop Bucking
·
We recommend
Modify
®
Baton Flat-Hop Bucking (Hard Type
for better air seal).
S-Nub
·
We have developed our S-Nubs (Silicone-Nub). Like our R-Hops, they are made
specifically for certain hopups
. They just fit and require
zero cutting
. Moreover,
you don't need to flatten the hop arm
.
·
R-Hop is extremely effective at hopping BBs. So normal nubs are usually too thick for R-Hop, and will result in overhopping even if the hop-dial is at zero.
·
For Krytac
®
& Prowin
®
hopups, if the nub is thicker than 1.5mm, BBs will constantly overhop. VFC® & Lonex® hopups require less than 1mm nub for R-Hopping.
·
Thus the thickness of S-Nub for Krytac
®
and Prowin
®
is 1.25mm. So you won't overhop at zero. The "sweet point" is around half at the hop-dial. S-Nub for VFC® & Lonex® is 0.8mm thick.
·
To use the S-nub, simply remove the stock nub, and drop in the S-Nub.
·
FYI, thickness of M-Nub=3mm. Thus, it will overhop unless you flatten the hop arm. But the flattened arm will probably be uneven, resulting in BBs flying to left or right.
Product origin: R-Hop & S-Nub: USA. Modify Baton Flat-Hop Bucking: Taiwan. ZCI 6.02mm Tightbore Barrel: China. R-Hopping, QC, and assembly: USA.
Same Business Day Free Shipping from
U
S
A
.
We ship
7 days/week
, yes, including
Sat & Sun
.