PID Temperature Controller k sensor pt100 40A 25A SSR Solid State Relay Inkbird

Description

Please note that this listing is variation listing. Each Model content is different. Please make sure which Model you need
About SSR:
A solid state relay (SSR) is an electronic switch, which, unlike an electromechanical relay, contains no moving parts.
The types of SSR are photo-coupled SSR, transformer-coupled SSR, and hybrid SSR.
A photo-coupled SSR is controlled by a low voltage signal which is isolated optically from the load.
The control signal in a photo-coupled SSR typically energizes an LED which activates a photo-sensitive diode.
The diode turns on a back-to-back thyristor,silicon controlled rectifier, or MOSFET transistor to switch the load.
25 DA SSR
Features:
Reliable SMT technology
High ultra insulation resistance over 50MΩ/500V DC
HIgh dielectric over more than 2.5KV
Low enable current less than 7.5mA/12V DC, compatible with CMOS IC or TTL
Low EMI/EFI & surge by zero cross trigger method
HIgh surge current over 410A/one cycle (60Hz)
High surge voltage duration by snubber circuit
Specifications:
Load Voltage: 24-380VAC
Load Current: 25A
Input Voltage: DC 3-32V
40A SSR
Features:
-Reliable SMT technology
-High ultra insulation resistance over 50M¦¸/500V DC
-High dielectric over more than 2.5KV
-Low enable current less than 7.5mA/12V DC, compatible with CMOS IC or TTL
-Low EMI/EFI & surge by zero cross trigger method
-High surge current over 410A/one cycle (60Hz)
-High surge voltage duration by snubber circuit
Specifications:
-Load Voltage: 24-380VAC
-Load Current: 40 A
-Input Voltage: DC 3-32V
K-Type Thermocouple Temperature Sensing For Temperature Controller
Temperature rang :0-400 C
Sensor Dia: 4.5mm
Cable Length: 2m(6.6ft)
External Shielding: Insulated Shielding
Internal Insulation:Fiberglass
PT100 Sensor Features:
Temperature rang :-50～250ºC
Length: 1M
Sensor Diameter: 4mm, probe length: 30mm