iPower Digital Heating and Cooling Thermostat Controller for Brewing Breeding

Description

iPower Digital Heating and Cooling Thermostat ControllerIt can be used as over-temperature protection and automatic temperature control system for various electric appliances such as equipment for home-brewing quarium pet breeding incubation, BBQ seedling heat mat temperature control, terrestrial heatcontrol, constant temperature cycleof healing pump,culture fermentation accele rating germination electric radiator, electricoven.etc
Instructions for the controller to switch heating and cooling modes
For example set TS=25℃ CD=2℃ and HD=3℃ then when measured temperature is higher or equal to 27℃ (TS+CD), system enters refrigeration status when temperature decline to 25℃ (TS) stop refrigeration: when measured temperature is lower or equal to 22℃ (TS-HD) system enters heating status; when the temperature raised to 25℃ (TS) stop heating.
TS: Temperature set value; CD: Heating differential value; HD: Cooling differential value;
Main Features
Plug and play design, easy to use;
Dual relay output, be able to connect with refrigeration and heating equipment at the same time;
Support reading with Centigrade or Fahrenheit unit;
Maximum output load: 1200W(110V)/2200W(220V);
Dual display window, be able to display measured temp and set temp at the same time;
Temp calibration; Compressor delay protection for refrigeration control;
High and low temp alarms are available: Over-Temp and sensor fault alarm;
Heating / Cooling differential function could be set separately for refrigeration and heating to protect temp controller from violent change.
Button Instructions
PV: Process Value. Under running mode, display current temperature; under setting mode, display menu code.
SV: Setting Value. Under running mode, display setting temperature; under setting mode, display setting code.
Heating Indicator Light: when the light is on, start heating.
Cooling Indicator Light: when the light is on, start refrigeration: when the light is flickering, the compressor is under delay protection.
SET key: press SET key for 3 seconds to enter menu for function setting. During the setting process, press SET key for 3 seconds to quit and save setting changes.
INCREASE key: under running mode, press INCREASE key to inquiry HD value; under setting mode, press INCREASE key to increase value.
DECRESE key: under running mode, press DECRESE key to inquiry CD value; under setting mode, press DECRESE key to increase value.
Heating Device Socket: this socket is for heating output.
Cooling Device Socket: this socket is for refrigeration output.
Detailed Function Description
Alarm High / Low Limit Setting (AH,AL)
When measured temperature is higher or equal to AH high temperature alarm will be triggered, buzzer will alarm with tone"bi-bi-Bii"until the temperature is lower than AH or an ykey is pressed.(AH: Alarm High Limit)
When measured temperature is lower or equal to AL,low temperature alarm will be triggered buzzer will alarm with tone"bi-bi-Bii"until the temperature>AL or any key is pressed.(AL: Alarm Low Limit)
Compressor Delay (PT)
Under refrigeration mode,after power on, if the measured temperature is higher than the value of setting temperature(TS) plus cooling differential (CD) the equipment won't start refrigeration immediately but waiting for a delay time.
When the time interval between two refrigeration operation is larger than presetdelay,the equipmen twil lstart refrigeration immediately.
when the time interval between two refrigeration is less than preset delay, the equipment won't start refrigeration until preset delay is satisfied.
Delay time will be calculated right after the moment of refrigeration stops.
Easy to Hang
LN-217G
LN-217G is an easy-to-use safe andreliable dual relay output temperature controller.It can be used as over-temperature protection and automatic temperature control system for various electric appliances
High Precision Probe
Temperature accuracy: ±2℉(-58-160℉)
Product Description
iPower Professional Digital Heating and Cooling Thermostat Controller for Seed Germination, Reptiles and Brewing Breeding Fermenter Greenhouse, Grow Tent, 1200W
Features
Multifunction: Dual outlet, can independently control heating and cooling devices; Compressor delay; High & low temperature alarm; Temperature calibration.
High accuracy: Professional grade waterproof temperature probe with working temperature from -58 to 248°F; Temperature accuracy: ±2℉(-58-160℉). Digital display supports units in both Fahrenheit and Celsius.
Easy to use: Simply set the temperature probe, plug-in the controller, use the large 3-button interface to choose your desired temperature setting. With 2 keyholes on the back, easy to mount on the wall.
Variety of use: iPower thermostat controller can be used for seedling germination, rooting, brewing, heating, fermentation, reptiles and more to keep your various environments in their ideal temperature range.
Safety: This thermostat controller comes with overload protection. Rated voltage: 80-250VAC, 50/60Hz, max loading: 10A, 110V/1200W.