INKBIRD Digital Temperature Controller Heat Pump Control C/F Switch Relay Output

Description

Home
Payment
Shipping
About us
Contact us
Details
Shipping Policy
Payment Method
Returns Policy
Shipping Policy
Payment Method
Returns Policy
Copyright©2017 DataCaciques
ITC-308
ITC-306T
Seedling Heat Mat
IPT-2CH
ITC-608T(Temp.Probes*2)
ITC-608T(Temp./Humid)
Brew Heat Mat
ITC-308
Main Features:
Plug and play design, easy to use;
Dual relay output, be able to connect with refrigeration and heating equipment at the same time;
Support reading with Centigrade or Fahrenheit unit;
Maximum output load: 1100W(110V);
Dual display window, be able to display measured temperature and set temperature at the same time;
Temperature calibration;
Compressor delay protection for refrigeration control
High and low temperature alarms are available;
Over-temperature and sensor fault alarm
Heating/Cooling differential function could be set separately for refrigeration and heating to protect temperature controller from violent change.
Package Included:
1x ITC-308 Temperature Controller
1x Manual
Specification:
--Input Power Cable Length: 1.5m (5ft)
--Output Power Cable Length: 30cm (1ft)
--Dimension Body: 140x68x33mm (5.5x2.7x1.3inch)
--Socket: 85x42x24mm(3.3x1.7x1inch)
--Input Power Cable Length: 1.5m (5ft)
--Output Power Cable Length: 30cm (1ft)
--Dimension Body: 140x68x33mm (5.5x2.7x1.3inch)
--Socket: 85x42x24mm(3.3x1.7x1inch)
Range Details:
Temperature Control Range: -50~120 °C / -58~248° F
Temperature Resolution: 0.1 ° C / 0.1° F
Temperature Accuracy: 1°C (-50 ~ 70°C) / 2°F (-58 ~ 160° F)
Temperature Control Mode: On/Off Control, Heating and Cooling
Input Power: 100 ~240VAC, 50Hz/60Hz Temperature Control Output: Max. 10A, 100V ~240V AC
ITC-306T
Product Description
Inkbird temperature controller is a pre-wired heating thermostat with a timing function,
especially for reptile breeding, incubation, and cultivation
.
This heating thermostat can
be set to two different temperatures
with its dual function timing cycle for
24 hours after the day and night
, which may better suited to the physiological needs of fish and aquarium plants.
This thermostat has
overheating protection
and
automatic temperature control
for all kinds of electrical equipment
for the greenhouse heater, and heat mat
.
With
a dual LCD display
, the temperature controller offers an optional display of Celsius or Fahrenheit, allowing humanized temperature control.
The dual heating thermostat has
Temperature calibration
, the temperature may become more accurately controlled with its function of temperature calibration and temperature hysteresis.
Plug & Play design
, easy to use. Just plug the heater in sockets at the ITC-306, and set your desired temperature to be ok.
Temperature range
: -50~99 °C / -58~210 ° F. Maximum total output load: 2200 W (220 V).Input Power: 100 ~240VAC, 50Hz/60Hz. Temperature Control Output: Max. 10A, 100V ~240V AC
Product parameters
Temperature Resolution: 0.1 ° C / 0.1° F
Temperature Accuracy: ±1°C (-50 ~ 70°C) / ±1°F (-50 ~ 160° F)
Ambient Temperature: -30~ 75 ° C / -22~ 167°F
Socket (UK Version): 140x51x27mm (5.5x2.0x1.0 inch)
There will be 2 situations when you use this reptile thermostat:
'PV' is the current temperature
'SV' is the setting temperature
'TS' is your target value
'DS' is the differential value 'CA' is the calibrated value
'CF' is the unit of temperature (C or F)
'TR' is time setting ( 0:off / 1:on )
1.If you only need to control one temperature range the whole day:
Your ideal temperature range: 22~25C, the settings as follow:
TS1=25, DS1=3, CA=0, CF=C, TR=0
With this setting, when the PV actual temperature lower than TS1-DS1=25-3=22C, the work light will turn on and your heaters will start outputting until the temperature reaches 25C (TS1/SV), it will stop.
2.If you need to control different temperature range during day and night:
Your ideal temperature range: during 8:00~18:00, keep the temperature within 22~25C, during 18:00~8:00, keep the temperature within 27~25C
TS1=25, DS1=3, CA=0, CF=C, TR=1, TS2=27, DS2=2, TA=8, TB=18, TH=the hour of the current time when you set, TM= The minute of the current time when you set
During (8:00~18:00) TA~TB, the thermostat will work with TS1 and DS1. During (18:00~8:00) TB~TA, the thermostat will work with TS2 and DS2
Seedling Heat Mat
Inkbird Seedling Heat Mat
is designed with waterproof construction and safe for use seedling, reptile keeping, brewing,
with stronger
heating wire
and thicker multi-layer construction offer more uniform heating and the durability to withstand rugged environments.
Features:
🍀
【Reliable & Upgraded Heating
INK-HM20W professional heat mat is quipped with upgraded heating film, provides gentle and warm heat for the plant germination,
and maintains the temperature of the root area between 86℉-104℉ when the ambient temperature is around 68℉.
The upgraded heating film is solid and stable, it will never scorch your plants.
🍀
【Stable & Flexible
The strong heating film and the flexible construction offer more uniform heating and the radiate far-infrared light wave making the heat source softer
and evenly, perfect for seed starting and home gardening. The mat is soft and can be stored as a roll, no crease will be left when unfolding it.
It will be great to use in conjunction with INKBIRD thermostats.
🍀
【Safe & Durable
The MET certificated seeding mat adopts the high-temperature resistant thickening material, reinforced power cord, and latest heating film,
can withstand damp greenhouse environments, and is safe to use both indoors and outdoors. INKBIRD will provide a 1-year warranty and lifetime
consultation service, please feel free to contact us at any time!
🍀
【Waterproof&Perfect Size
The heating pad is rated IP67 waterproof, and proofed against splashes, showers, and sprays.
the 10" x 20.75" heating mat is slightly bigger than other mats on the market, ideal for standard 1020 trays.
Item No:
INK-HM20W
Specification:
220VAC 60Hz 20Watts
Size:
10.43*2.24*2.24"
Power Cord Length
: 5.9Ft
Weight:
0.81bl
④What You Get
2x Seedling Heat Mat
WARNINGS
Fire or electric shock may result from improper use.
Please keep the heating mat away from sharps.
Do not place the mat inside tray or cover directly with soil or growing medium.
Do not place any heat insulting materials over heating mat, as it may cause it to overheating.
Do not immerse in water.
INSTRUCTIONS
Place the heating mat on a well drained surface(without standing water).
Place the mat on an insulated surface instead of a cold floor will increase the mat temperature and covering the plant tray with a humidity
cover or dome will help increase the temperature of the root area and maintain the humidity of the roots.
Plug the mat into a 120 volt power source.
When the ambient temperature is 68 ℉, the surface temperature of the heating mat can be heated to 104℉ after 30 minutes of working, which is ideal
IPT-2CH
Inkbird WiFi Reptile Thermostat Temperature Controller
with 2 Probes and 2 Outlets, IPT-2CH Reptiles Heat Mat Thermostat (Max 250W per Outlet)
Features
Free IOS and Android APP (INKBIRD) to monitor temperatureat any time.
Plug-n-Play, easy to use.
Supports both Celsius and Fahrenheit units.
LCD display, displays the testing temperature, the target temperature and the output state.
Supports temperature calibration.
High/Low temperature alarm.
Probe abnormal alarm.
NOTE:
1 IPT-2CH = 2 other temperature controllers + WiFi
Outlet 1 pairs probe 1, controlling one heat mat, while outlet 2 pairs probe 2, controlling another heat mat.
Description:
With this heat mat temperature controller, data charts or data exported, high/low-temperature alarms, and probe error alarms are available via the INKBIRD app
①Dual relay control
Controls two sets of outputs. users can set different target temperatures according to different environments.
②Easy to place
There is a suction cup for the probe which is allowed to place the probe more stable.
The controller can be placed wherever you want with a nail.
③Application
The temperature controller can be used for seedling germination, rooting, home brewing, heating, fermentation, and fermentation to
provide a constant custom temperature, keeping your various environments in the ideal temperature range.
④What You Get
1xTemperature Controller*1
2x Temperature Probes
Specification:
--Dimension: 122×80×32mm/4.8in*3.15in*1.26in(US)
--Screen Size: 225×375mm/0.89in*1.48in
--Temperature Unit: ℃/℉
--Temperature Control Range: 0.0℃~45.0℃/32.0℉~113℉
--Temperature Measurement Range: -5.0℃~50.0℃/23.0℉~122℉
--Temperature Display Accuracy: 0.1℃/℉(T<100℃/℉), 1℃/℉(>=100℃/℉)
--Temperature Measurement Accuracy: ±1℃/±2℉
--Operating Ambient Temperature: -20℃~60℃/-4℉~140℉
--Storage Environment:
--Temperature range: 0℃~60℃/32℉~140℉
--Humidity range: 20~80%RH(not frozen or condensation)
ITC-608T(Temp.Probes*2)
ITC-608T Details
SAFE & RELIABLE:
ITC-608T thermostat temperature controller is ETL listed, and rigorously tested for quality control and safety. Conforms to ETL Control No.5011830.
[Dual Relay Output] Be able to connect with refrigeration and heating equipment at the same time
[Dual Display Window] Be able to display measured temperature and set temp at the same time
MULTI-PURPOSE & CONVENIENT DESIGN:
Temperature controller ITC-608T can be used in home brewing (refrigerator), fermenting, greenhouse, terrarium, reptile, planting (Cannabis,mushroom), meat storage and cooking.
Technical Parameters
Maximum Output Load: 120 Vac, 60 Hz, 15 A, 1800 W
Temperature Measurement Range: -40~100°C /-40~212°F
Display Unit: °C or°F；Temperature Display Accuracy: 0.1°C /°F (<100°C /°F)
Storage Environment：0℃~60℃/32℉~140℉
Ambient Temperature: -20~60°C /-4~140°F
Temperature Sensor Cable Length: 2 m (78.74 in)
Input Power Cable Length: 1.5 m (59.05 in)
Unit Dimension: 20.8 cm*8.5 cm*3.5 cm (8.19*3.35*1.38 in)
What You Get
1x ITC-608T Controller
2x Temperature Sensors
ITC-608T(Temp./Humid)
Pre-Wired AC Dual Stage Outlet Thermostat with 12 Period Time Stage,1800 W, ETL Listed.
Three versions can be chose:
Temperature Version
,
Humidity Version
and
Temperature & Humidity Version
.
Plug and play design, easy to use.
Be able to control temperature and humidity at the same time.
Be able to connect with humidifier and dehumidifier equipment at the same time.
Be able to connect with refrigeration/ heating and humidifier/dehumidifier equipment at the same time.
Heating/Cooling function could be set separately for refrigeration and heating to protect temperature controller from violent change. Same as humidity Control.
ITC-608T Details
SAFE & RELIABLE:
ITC-608T thermostat temperature and humidity controller is ETL listed, and rigorously tested for quality control and safety.
Conforms to ETL Control No.5011830.
[Dual Relay Output]
Be able to connect with refrigeration and heating equipment at the same time
[Dual Display Window]
Be able to display measured temperature/humidity and set temp/humidity at the same time
[What You Get]
1x ITC-608T With Temp&Humid Sensor
Technical Parameters
Maximum Output Load:
120 Vac, 60 Hz, 15 A, 1800 W
Temperature Measurement Range:
-40~100°C /-40~212°F
Display Unit:
Temp:°C or°F；Humidity：%RH ;Temperature Display Accuracy:
0.1°C /°F (<100°C /°F)
Relative Humidity Measurement Range:
5~99%RH
Humidity Display Accuracy:
0.1%RH
Storage Environment：
temp：0℃~60℃/32℉~140℉； humidity：20~80%RH(Unfrozen or condensation state )
Ambient Temperature:
-20~60°C /-4~140°F
Temperature/ Humidity Sensor Cable Length:
2 m (78.74 in)
Input Power Cable Length:
1.5 m (59.05 in)
Unit Dimension:
20.8 cm*8.5 cm*3.5 cm (8.19*3.35*1.38 in)
Brew Heat Mat
INSTRUCTIONS
-Place the mat on a flat and dry surface.
-Do not put any heat-insulating objects on the mat, it may cause the -mat to overheat.
-Do not attempt to repair or dismantle the unit by yourself.
-Do not immerse the mat in water.
-For indoor use only.
Item No: INK-HM6.5W
Specification: 120VAC 60Hz 6.5Watts
Size: 3"x20"
Detail
△
Stable&Flexible
The heat mat is equipped with an upgraded heating film which is solid and stable, provides gentle and warm heat for the plant germination, and maintains the temperature between 68°F to 86°F (20°C to 30°C). The soft mat can also be stored as a roll, no crease will be left when unfolding it.
△
Energy Efficient&Space Saving
This 3" x 20" mat is ideal for small spaces such as countertops and windowsills, and it runs on only 6.5 Watts, saving electricity for you.
△
Waterproof&Easy Cleaning
The heating pad is rated to IP67 waterproof, and proofed against splashes, showers, and sprays. It will be convenient to clean the heating pad by rinsing and wiping.
△
Safe&Durable
The MET certificated seeding mat adopts the high-temperature resistant thickening material, reinforced power cord, and latest heating film, which can withstand
What You Get:
2x Brewing Heat Mat
On Sep 13, 2022 at 04:44:50 PDT, seller added the following information: