For Nissan Pathfinder V6 1996-2004 Power Steering Rack &Pinion+2 Outer Tie Rods

Description

Fit For:
1996-2004 Nissan Pathfinder
1997-2003 Infiniti QX4
Package Include:
Power Steering Rack and Pinion
2 outer tie rod ES3466
How Does Rack and Pinion Steering Work?
For Nissan Pathfinder V6 1996-2004 Power Steering Rack &Pinion+2 Outer Tie Rods
Fit For:
1996-2004 Nissan Pathfinder
1997-2003 Infiniti QX4
Package Include:
Power Steering Rack and Pinion
2 outer tie rod ES3466
How Does Rack and Pinion Steering Work?
Rack and pinion steering uses a gear-set to convert the circular motion of the steering wheel into the linear motion required to turn the wheels. It also provides a gear reduction, so turning the wheels is easier.It works by enclosing the rack and pinion gear-set in a metal tube, with each end of the rack sticking out from the tube and connected to an axial rod. The pinion gear is attached to the steering shaft so that when the steering wheel is turned, the gear spins, moving the rack. The axial rod at each end of the rack connects to the tie rod end, which is attached to the spindle.
Product Description
Manufactured to high quality
control standards
With high reliability, quality and durability
Air tested to ensure reliable performance
Hydraulic tested to ensure internal bypass of high and low pressures
Using high-quality materials to extend the service life of Products
Making it easier to turn the wheels.
Helping drivers steer by augmenting steering effort of the steering wheel.
Symptoms of a Rack and Pinion Leak:
Steering wheel hard to turn
Red or pink fluid leaking from vehicle
Burning smell
Grinding noise
Steering wheel does not center
How to Replace the Power Steering Rack & Pinion
1.Put the wheels in a straight-ahead position
2.Crack loose all the wheel lug nuts
3.Raise and support the vehicle with approved jack stands.
4.Remove both front wheels.
5.Remove the Steering Shaft Coupler Outer Seal and unbolt the upper pinch bolt on the Steering Shaft Coupler assembly
6.Detach the outer tie rod ends
7.Remove any parts required to gain access to the rack mounting bolts, lines and steering coupling.
8.Remove the power steering rack mounting bolts, or crack the power steering high pressure and return lines
9.Place a drain pan under the vehicle and remove the hydraulic power steering pressure hose and power steering return hose from the power steering rack
10.Twist and turn and jiggle it out through one of the wheel well openings
11.Reconnect the Steering Shaft Coupler assembly and bolt the rack back into place
12.Reattach the tie rod ends to the steering knuckles
13.Put the wheels back on and torque the lug nuts to specifications.
14.Remove the return line from the power steering pump and place the end into a bucket.
15.Fill the power steering pump and start the engine until clean fluid comes out of the return hose.
16.Have the front end aligned to reset the toe-in adjustment to specification or the vehicle will handle poorly and wear out the tire quickly.
17.Bleed the trapped air out of the system
(
Professional installation is highly recommended
)
Item Specifics
Brand
fly-autopartsclub
Features
Durability Tested
Manufacturer Part Number
10115551
OE/OEM Part Number
rack replacement kit,rack and pinion,power rack parts
Interchange Part Number
244-0031;Rack 25410;ES3466
Superseded Part Number
244-0031;Rack 25410;ES3466
Vintage Car Part
Yes
Performance Part
Yes
OE Number
Power Steering Rack;Steering Rack and Pinion
Surface Finish
Polished, Rust Protected
Transmission Type
Automatic
Type
Steering Gear;Steering Gear Body;Steering Rack;Rack & Pinion
Shipping Country
US
Greasable or Sealed
Yes
Manufacturer Warranty
1 Year
Rack Type
Hydraulic
Installation method
Performance/Custom
Sub Type
Rack and Pinion Assembly, Rack and Pinion Rack Gear
Universal Fitment
No
Package
Dust plug
Material
High Quality Steel
Direct Replacement
Yes
Rack Material
corrosion and rust prevention
Payment
We accept eBay's Safe and Secure Checkout.
Payment Options: Paypal, Visa, Mastercard, American Express, Discover and other payment that is accepted by eBay.
Handling & Shipping
Handling time: 90% of the packages will be shipped out within 24 hours, other packages will be shipped out within 48 hours.
Shipping time and carriers: All pacakges will be arrived within 2-8 working days via UPS, USPS, FedEx and other certified carriers by eBay.
Do check the condition of the parcels, and check the items before install them.
If the package didn't ship on time or arrived on time, do contact us please.
Return & Refunds
We offer 30-day free return and refund.
1.Please contact us for return process before you return the item.
2.All of our brand new items come with a 30-Days money-back guarantee.
3.If the product you receive is defective or not the one you ordered, please take photos and contact us directly, photos must be clear and have the part numbers and tracking number visible.
4.We will replace the defective items, provided that they are in stock within the warranty period and the buyer return the original item and pay for the reshipping cost for the replacement.
5.If you request a return not due to product quality issue, wrong description or damages, the returning cost will be put in buyer's side, and shipping & handling cost are not refundable.
6.Man-made damage is not covered by this warranty.
7.Refunds will be credited within 5 to 7 business days of receiving the return.
Contact Us
We are dedicated to provide high quality products and satisfied customer service to our sincerely customers, so if there's any questions or problems with our products or service, feel free to contact us please.
Feedback
We will leave positive feedback after you paid the order.
If for some reason there is any issue with the purchase, please contact us prior to leaving feedback, we will be glad to work together and provide a satisfying solution.
DESCRIPTION
PAYMENT
SHIPPING
RETURN POLICY
CONTACT US
About us
Shop Category
Store Home
Timing Chain Kit
Timing Belt Kit
Roof Rack
Leveling Lift Kit
Blower Motor
AC Compressor
Oxygen Sensor
Sun Visor
Ignition Coil
Ignition Distributor
Coolant Overflow Tank
Radiator
CV Axle
Power Steering Pump
A/C Condenser
Tensioner
cooling fan
Power Steering Rack and Pinion
water pump
radiator support
Seat Cover
Drive shaft
Thermostat Housing
about Horn
Suspension Kit
wheel hub bearing
Other
Hot Item
Left Driver Side Sun Visor For Toyota 4Runner 4.0L 4.7L 2004-2008 743203D050B0
USD 38.69
4Pcs Roof Rack Cover Rail End Shell For Toyota RAV4 2.4L 2.5L 3.5L 2006-2012
USD 22.07
Timing Chain Set For 2009-2015 Audi Volkswagen CC Eos Tiguan 06K109158
USD 86.48
Timing Kit For 2010 Chevrolet Equinox 2009 Chevrolet Cobalt 2.2L Malibu HHR
USD 36.99
Timing Chain Kit For Nissan Frontier Pathfinder Xterra 4.0L 2005-2015 TK3042
USD 111.59
New List Items
Water Pump W/ Gasket For 1983-1986 Nissan 720 1986-89 Nissan D21 2.4L 2389CC l4
USD 70.99
Rear Wheel Bearing & Hub Assembly For 1984-1986 Chevrolet Corvette 5.7L 513020
USD 52.99
Water Pump w/Gasket For 2004-12 GMC Canyon Chevy Colorado 2.9L 3.7L l4 l5 4-Door
USD 40.99
Rear Wheel Hub Bearing For 2000-08 Chevy Impala 88-08 Pontiac Grand Prix 513018
USD 55.99
Ignition Coil For 2011-2017 Ford F-250 Super Duty F-350 Super Duty 6.2L V8 DG525
USD 20.99
Help & Info
Payment Policy
Shipping Policy
Return Policy
FAQ
About Us
For Nissan Pathfinder V6 1996-2004 Power Steering Rack &Pinion+2 Outer Tie Rods
Fit For:
1996-2004 Nissan Pathfinder
1997-2003 Infiniti QX4
Package Include:
Power Steering Rack and Pinion
2 outer tie rod ES3466
How Does Rack and Pinion Steering Work?
Rack and pinion steering uses a gear-set to convert the circular motion of the steering wheel into the linear motion required to turn the wheels. It also provides a gear reduction, so turning the wheels is easier.It works by enclosing the rack and pinion gear-set in a metal tube, with each end of the rack sticking out from the tube and connected to an axial rod. The pinion gear is attached to the steering shaft so that when the steering wheel is turned, the gear spins, moving the rack. The axial rod at each end of the rack connects to the tie rod end, which is attached to the spindle.
Product Description
Manufactured to high quality
control standards
With high reliability, quality and durability
Air tested to ensure reliable performance
Hydraulic tested to ensure internal bypass of high and low pressures
Using high-quality materials to extend the service life of Products
Making it easier to turn the wheels.
Helping drivers steer by augmenting steering effort of the steering wheel.
Symptoms of a Rack and Pinion Leak:
Steering wheel hard to turn
Red or pink fluid leaking from vehicle
Burning smell
Grinding noise
Steering wheel does not center
How to Replace the Power Steering Rack & Pinion
1.Put the wheels in a straight-ahead position
2.Crack loose all the wheel lug nuts
3.Raise and support the vehicle with approved jack stands.
4.Remove both front wheels.
5.Remove the Steering Shaft Coupler Outer Seal and unbolt the upper pinch bolt on the Steering Shaft Coupler assembly
6.Detach the outer tie rod ends
7.Remove any parts required to gain access to the rack mounting bolts, lines and steering coupling.
8.Remove the power steering rack mounting bolts, or crack the power steering high pressure and return lines
9.Place a drain pan under the vehicle and remove the hydraulic power steering pressure hose and power steering return hose from the power steering rack
10.Twist and turn and jiggle it out through one of the wheel well openings
11.Reconnect the Steering Shaft Coupler assembly and bolt the rack back into place
12.Reattach the tie rod ends to the steering knuckles
13.Put the wheels back on and torque the lug nuts to specifications.
14.Remove the return line from the power steering pump and place the end into a bucket.
15.Fill the power steering pump and start the engine until clean fluid comes out of the return hose.
16.Have the front end aligned to reset the toe-in adjustment to specification or the vehicle will handle poorly and wear out the tire quickly.
17.Bleed the trapped air out of the system
(
Professional installation is highly recommended
)
Item Specifics
Brand :
fly-autopartsclub
Features :
Durability Tested
Manufacturer Part Number :
10115551
OE/OEM Part Number :
rack replacement kit,rack and pinion,power rack parts
Interchange Part Number :
244-0031;Rack 25410;ES3466
Superseded Part Number :
244-0031;Rack 25410;ES3466
Vintage Car Part :
Yes
Performance Part :
Yes
OE Number :
Power Steering Rack;Steering Rack and Pinion
Surface Finish :
Polished, Rust Protected
Transmission Type :
Automatic
Type :
Steering Gear;Steering Gear Body;Steering Rack;Rack & Pinion
Shipping Country :
US
Greasable or Sealed :
Yes
Manufacturer Warranty :
1 Year
Rack Type :
Hydraulic
Installation method :
Performance/Custom
Sub Type :
Rack and Pinion Assembly, Rack and Pinion Rack Gear
Universal Fitment :
No
Package :
Dust plug
Material :
High Quality Steel
Direct Replacement :
Yes
Rack Material :
corrosion and rust prevention
Payment
We accept eBay's Safe and Secure Checkout.
Payment Options: Paypal, Visa, Mastercard, American Express, Discover and other payment that is accepted by eBay.
Handling & Shipping
Handling time: 90% of the packages will be shipped out within 24 hours, other packages will be shipped out within 48 hours.
Shipping time and carriers: All pacakges will be arrived within 2-8 working days via UPS, USPS, FedEx and other certified carriers by eBay.
Do check the condition of the parcels, and check the items before install them.
If the package didn't ship on time or arrived on time, do contact us please.
Return & Refunds
We offer 30-day free return and refund.
1.Please contact us for return process before you return the item.
2.All of our brand new items come with a 30-Days money-back guarantee.
3.If the product you receive is defective or not the one you ordered, please take photos and contact us directly, photos must be clear and have the part numbers and tracking number visible.
4.We will replace the defective items, provided that they are in stock within the warranty period and the buyer return the original item and pay for the reshipping cost for the replacement.
5.If you request a return not due to product quality issue, wrong description or damages, the returning cost will be put in buyer's side, and shipping & handling cost are not refundable.
6.Man-made damage is not covered by this warranty.
7.Refunds will be credited within 5 to 7 business days of receiving the return.
Contact Us
We are dedicated to provide high quality products and satisfied customer service to our sincerely customers, so if there's any questions or problems with our products or service, feel free to contact us please.
Feedback
We will leave positive feedback after you paid the order.
If for some reason there is any issue with the purchase, please contact us prior to leaving feedback, we will be glad to work together and provide a satisfying solution.
All rights reserved.