Commercial Ozone Generator Air Purifier 7000mg BLUE Water Mold Fire Smoke

Description

RETAIL PRICE 9.99
This Ozone Generator is an advanced and convenient contaminant remediation product. High-powered oxidation in a compact, light weight, rugged and simple design. Utilizing controlled corona discharge ozone technology developed specifically to reduce odors and smoke in unoccupied spaces, ideal for treatment for homes, office, automobiles & boats and more!
Specifications:
Model: 7000mg
Color: Blue
Rated voltage: AC 100-120V/50-60Hz
Power consumption: 100 watts
Air Volume: Max 100 CFM (2.8 m
3
/min)
Active Oxygen (on): 3.5 - 7.0 g/h
Sound Level: 45 dB
Product size: 7.1 (height) x 10.25 (length) x 8.26 (width) inches
Operation
The ozone generator is designed to remove odors in unoccupied spaces. The unit has a timer that will enable it to run for a maximum duration of 3 hours. The timer will then shut the Ozone Generator off. You should allow 40 minutes before returning to the treated area
To operate the Ozone Generator:
Close off the desired area to be treated.
Remove all occupants and pets.
Position the unit as close as possible to the odor source.
In environments that have individual heating and cooling systems, turn the fan on and set on re-circulate.
Set timer to desired time and leave the room.
Allow 40 minutes before re-entering the treated space.
Return to space & ventilation area.
Troubleshooting:
If you suspect a problem with your unit check the following:
Unit is plugged in properly.
It’s important that the Ozone Generator be properly grounded to avoid potential shock.
Fuse is installed properly and in good condition. To replace fuse, pull out the plastic fuse holder, remove old fuse and insert new fuse. Replacement fuse must be 2 amp (0.79 inch). Refer to picture as follows: